Cam Follower and Track Roller - Stud Type

Contact Now

Stud-type track rollers, such as cam followers, have a built-in threaded rod, instead of an inner ring, for either threaded mounting or through-hole mounting onto machine components. Through-hole mounting uses a hexagonal nut on the threaded end to secure the bearing into place. Yoke-type track rollers, such as roller followers.

 

 

 

Stud type track roller bearings CFS3V IKO cam follower bearings is roller bearings with cylindrical rollers that are small in diameter. In spite of their low cross section, needle roller bearings have a high load carrying capacity and are therefore extremely.Cam Followers (Stud Type Track Rollers) Without seal With seal 1. Types Cam followers are available in the standard types shown in Table 1. These standard bearings have a screwdriver slot built into the stud head, while the outer rings have a cylindrical outside surface. Cam followers, which are equipped with a thick outer ring.

MCGILL CFE 1/2 B Cam Follower and Track Roller - Stud Type

1400 Brass
800 360mm

MCGILL CFE 1 7/8 B Cam Follower and Track Roller - Stud Type

4800 C3
41mm 180mm

MCGILL CFE 1 7/8 SB Cam Follower and Track Roller - Stud Type

In Stock 54mm
95 C3

MCGILL CFE 1 5/8 SB Cam Follower and Track Roller - Stud Type

45.00 mm 190.0000 mm
4300 rpm 75.000 mm

MCGILL CFE 1 5/8 S Cam Follower and Track Roller - Stud Type

196.85 mm SR-18-15
SSAFS 518 48 kN

MCGILL CF 1/2 N Cam Follower and Track Roller - Stud Type

3600 20mm
In Stock 0.61 KGS

MCGILL CF 1/2 Cam Follower and Track Roller - Stud Type

320mm 33.90 KGS
Steel 23138kejw507c08-timk

MCGILL CF 1 7/8 B Cam Follower and Track Roller - Stud Type

157.559 mm 1215 K
82.55 mm 60.325 mm

MCGILL CF 1 5/8 Cam Follower and Track Roller - Stud Type

9000 0.455
In Stock Plastic

MCGILL CF 1 3/8 S Cam Follower and Track Roller - Stud Type

15.9 72mm
1207tnc3-nsk Plastic

MCGILL CF 1 1/8 Cam Follower and Track Roller - Stud Type

1.66 Steel
In Stock 8mm
1/11