Pillow Block Bearings

Contact Now

Pillow Block Bearings Pillow blocks, the most commonly used type of mounted units, are designed to provide shaft support where the mounting surface is parallel to the shaft axis. The bolt holes are usually slotted for adjustment during mounting. Pillow blocks are supplied in a variety of configurations.Pillow block bearings are a typical style of bearing.



These bearings are composed of a self-aligning ball bearing (the commonly used type) and plummer block. They can be attached to a shaft by fastening a ball retaining screw.Pillow block bearings, sometimes referred to as plummer block bearings, are mounted bearings that are used to provide load support for a rotating shaft. Their mounting surface is on a plane parallel and offset to the axis of the shaft. Mounting holes or slots in the base or feet of pillow block bearings permit adjustment and easy mounting.



AMI UESP207-20 Pillow Block Bearings

1.375 inch klnj1.3/8-r&m
0.20 KGS In Stock

AMI UCPX10-32 Pillow Block Bearings

3600 rpm 47.00 mm
215.0000 mm 3000 rpm

AMI UCPX08-24 Pillow Block Bearings

2.61 KGS Plastic
Open Type Standard

AMI UCPX12-39 Pillow Block Bearings

1.1 mm 0.64 kg
90 mm 135 mm

AMI UCPX09 Pillow Block Bearings

110.0000 mm 0.003 mm
25500 N 76.200 mm

AMI UCPX11-35 Pillow Block Bearings

16700 Medium
Open Type 34.5

AMI UCPX11 Pillow Block Bearings

1.25 Inch 0.20 KGS
Standard mj2.1/2-rhp

AMI UGAK211-35 Pillow Block Bearings

2.00 mm 6700 rpm
63700 N Seal & Snap-Ring

0.625 Inch | 15.875 Millimeter x 1.079 Inch | 27.4 Millimeter x 1.188 Inch | 30.175 Millimeter NTN UCP-5/8 Pillow Block Bearings

42.00 mm 104000 N
Two Shields 2.50 mm

2 Inch | 50.8 Millimeter x 2.469 Inch | 62.7 Millimeter x 2.188 Inch | 55.575 Millimeter IPTCI NAPL 210 32 L3 Pillow Block Bearings

5.8 Open Type
137 In Stock